Hyper scan scanner

고속으로 회전하는 Polygon 미러를 통해 2축 scanner 대비 10배 이상 빠른 속도로 laser beam을 주사할 수 있으며, ablation rate이 낮은 laser에 적용하여 공정 시간을 크게 단축시킬 수 있습니다.

Product	Lincoln hyperSCAN Polygonal Scan Head
Highlights	Designed for ultra-high-speed, dual-axis scanning on fixed targets
Wavelength Options	355 nm, 515 nm, 532 nm, 1030 nm, 1064 nm
Scan Rate	217 - 616 lines/s
Scan Speed (on target)¹	70 - 200 m/s
Output Scan Angle²	±16° (Typical)
Input Clear Aperture	15 mm
f-theta Optics Focal Length	255 mm
Spot Size(M²=1.0) at 532nm³	25 µm
Field Size	160 mm X 160 mm
Resolution, X Axis	<3 μm
Resolution, Y Axis	<3 μm
Repeatability, X axis⁴	± 15 μm
Repeatability, Y axis⁴	± 15 μm
X-Y Axes Galvanometers	Yes
Start of Scan Sensor	Yes
CDA Purge Port	Yes
Control Card	Included, with software interface
Input Power	24VDC 3A, 48VDC 6A (scan head); 12VDC 2A (controller)
Data Cable Length	5m (16.4 ft) max.
Laser Requirements	Pulse on Demand (POD), Synchronization, Seed Frequency ≥ 50MHz
Operating Environment	25 °C ±10 °C≤ 80% RH, non-condensing
Dimensions (excluding handles and scan lens)	10 in x 10.25 in x 10 in (254 mm x 260 mm x 254 mm)
Weight	approx. 22 kg.
Datasheets	Product sheet
Notes	1) Calculated based on the scan rate and the use of an f-theta lens of 255 mm EFL 2) Larger scan angles available with reduced input beam size 3) Collimated input beam 4) Laser dependent

Polytek

Product	Lincoln POLYtek™ Polygonal Scan Head	Start of Scan Sensor	Yes
Highlights	Designed for ultra-high-speed, single-axis scanning on moving targets	CDA Purge Port	Yes
Wavelength Options	355 nm, 532 nm, 1064 nm, 10.6 μm	Input Power 4	120 VAC, to controller
Scan Rate	150 – 800 lines/s (Standard) 0 – 1600 lines/s (Optional)	Control Card	Included, with software interface
Scan Speed 1	48 – 256 m/s (Standard) 0 – 512 m/s (Optional)	Data Cable Length	25 ft. (7.62m) Max
Input Beam Size	15 mm (Max.)	Y- Axis Galvanometer	Optional
Line Placement Repeatability – Y Axis	±16 μrad	Galvanometer Analog Communication	±10 V
Optimal Laser Pixel Placement Repeatability X Axis	±48 μrad	Dimensions (excluding handles and scan lens)	10 in x 10.88 in x 11.43 in (254 mm x 276 mm x 290 mm)
Output Scan Angle 3	±16° (Typical)	Datasheets	Product sheet
Operating Temperature	15 °C ±10 °C	Notes	1) Calculated based on the scan rate and the use of an f-theta lens of 255 mm EFL 2) Larger scan angle with input beam diameter less than 15 mm 3) Requires ±15 VDC (7 Amps. Max), 5 VDC, and 24 VDC input power to the scan head